Mounting On A Wall Or Ceiling - Colubris Networks CN3000 Administrator's Manual

Chapter 3 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Installation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Chapter 3
Mounting on a The CN3000 can be mounted on a wall or ceiling. In both cases, the unit hangs upside
down.
wall or ceiling
Note: Do not mount the CN3000 on a wall or ceiling until after you have configured it.
Included in the package are two screws and anchors suitable for attaching the CN3000
to walls constructed out of drywall or similar material.
1. Mark the anchor locations on a wall or ceiling using the notches on the case.
2. Use a phillips-head screwdriver to install the plastic anchors in the wall (pre-drilling
3. Insert and tighten the screws leaving a 1/16" (1 mm) gap to hang the CN3000.
4. Hang the CN3000 on the two screws.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 65 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1
is not required).
3