Update The Steel-Belted Radius Configuration - Colubris Networks CN3000 Administrator's Manual

Chapter 14 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Sample setup - Backend software - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Chapter 14
Update the 1. Return to the Steel-Belted Radius Configurator window.
2. Click Servers.
Steel-Belted
3. Click Disconnect.
Radius
4. Open a command-line session and execute the command:
configuration
5. Return to the Steel-Belted Radius Configurator window.
6. Click Connect.
7. Click Configuration
8. In the Authentication methods box, select SQL and click Activate (if it is not
9. Click Save.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 309 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
net stop "Steel-Belted Radius"
net start "Steel-Belted Radius"
already active). Deactivate all other authentication methods.