Default User Idle Timeout; Default User Smtp Server; Default User Session Timeout - Colubris Networks CN3000 Administrator's Manual

Chapter 11 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Configuration parameters - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Chapter 11
default-user-max-output-octets= value
Where:
Default user idle
Use this to set the default idle timeout for all customers whose RADIUS profile does not
contain a value for the RADIUS attribute idle-timeout .
timeout
Syntax
default-user-idle-timeout= seconds
Where:
Default user Use this to set the default SMTP server address for all customer sessions. This address
is used if a specific server is not set for a particular customer.
SMTP server
Syntax
default-user-smtp-redirect= hostname [: port ][,username,password]
Where:
Default user Use this to set the default session timeout for all customers whose RADIUS profile does
not contain a value for the RADIUS attribute session-timeout .
session timeout
Syntax
default-user-session-timeout= seconds
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 275 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Parameter Description
For packets: 32-bit unsigned integer value.
value
For octets: 64-bit unsigned integer value.
Parameter Description
Specify the maximum amount of time a customer session
seconds
can be idle. Once this time expires, the session is
automatically terminated. A value of 0 means no timeout.
Parameter Description
Specify the IP address or domain name of the e-mail server.
hostname
Maximum length is 253 characters.
Specify the port on the e-mail server to relay to. Range: 1 to
port
65535. Default: 25
Specify the username required to log on to the SMTP server.
username
Maximum 32 characters. Only used if the Support
authentication on SMTP proxy server option is enabled on
the Security > Authentication > Advanced page. Works
with SMTP servers that support plain or CRAM-MD5
authentication.
Specify the password required to log on to the SMTP server.
password
Maximum 32 characters. Only used if the Support
authentication on SMTP proxy server option is enabled on
the Security > Authentication > Advanced page. Works
with SMTP servers that support plain or CRAM-MD5
authentication.