Chapter 14 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Sample setup - Backend software - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Chapter 14
Configure
The CN3000 must be configured to communicate with the Steel-Belted Radius server.
For a detailed explanation of configuration issues, see
RADIUS settings
and customer settings" on page
1. On the Security menu, click RADIUS.
2. Click Add New Profile. The RADIUS settings page opens.
3. Configure the following parameters:
4. Click Save.
5. Click Authentication. The Authentications settings page opens.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 314 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
• Primary server address: Specify the address of Server 1. For this example, use
the address: 192.168.2.99
• Primary server secret: Specify the secret you defined on when configuring Steel-
Belted Radius. For this example, use the secret: secret
Chapter
143.
7:
"Customizing CN3000