Rip Configuration; Rip - Colubris Networks CN3000 Administrator's Manual

Chapter 11 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Configuration parameters - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Chapter 11

RIP configuration

Open the Network > RIP page.

RIP

The CN3000 supports RIP versions 1 and 2. RIP can operate in one of two modes on
each of the CN3000's ports.
Note: RIP is not supported if you are using PPPoE on the Internet port.
Passive mode
The CN3000 listens for routing broadcasts to update the routing table, but does not
broadcast its own routes.
Active mode
The CN3000 listens for routing broadcasts to update the routing table, and also
broadcast its own routes.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 244 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -