Sensor (media out) removal
1.
Remove the appropriate media feed unit assembly. See
page 4-18
2.
Remove the media out actuator. See
3.
Disconnect the connector from the sensor (media out) (A).
4.
Release the hooks securing the sensor (media out) (A) to the media feed unit.
5.
Remove the sensor (media out) (A).
or
"Media feed unit assembly 2 removal" on page
Harness
Lower view
"Media feed unit assembly 1 removal" on
"Media out actuator removal" on page
Front
A
Hook
Hooks
4-21.
4-35.
Repair information
4024-110
4-37