Sensor (punch carriage shift HP) removal
1.
Open the finisher front door assembly.
2.
Remove the rear upper cover. See
3.
Remove the punch carriage assembly. See
4.
Remove the one screw securing the bracket (A) to the punch carriage unit (B).
5.
Release the hooks securing the sensor (punch carriage shift HP) (C) to the bracket (A).
A
6.
Remove the sensor (punch carriage shift HP) (C).
"Rear upper cover removal" on page
C
"Punch carriage assembly removal" on page
B
4024-110
4-24.
4-41.
4-51
Repair information