Sensor (Hcit Tray Raised Hp) With Cable Assembly Removal - Lexmark MB790MFP Service Manual

7462
7. Remove the media size actuator from the card mount option.
8. Remove the card mount option.

Sensor (HCIT tray raised HP) with cable assembly removal

Note: Carefully remove the base machine from the HCIT tray assembly before proceeding.
1. Remove the HCIT cover, left. See
2. Disconnect the sensor (HCIT tray raised HP) from the HCIT controller card assembly.
Note: Remove the cable from the restraints, and observe the routing for reinstallation.
3. Remove the screw (A) securing the sensor to the upper rear frame.
4. Release the hooks (A) securing the sensor to the rear frame.
4-172
Service Manual
"High capacity input tray (HCIT) cover, left removal" on page
Previous
Next
Go Back
4-164.