4024-110
Sensor (upper media exit) removal
1.
Open the finisher front door assembly.
2.
Remove the rear upper cover. See
3.
Remove the top cover. See
4.
Disconnect the connector from the sensor (upper media exit) (A).
5.
Release the hooks securing the sensor (upper media exit) (A) to the finisher.
6.
Remove the sensor (upper media exit) (A).
4-104
Finisher Service Manual
"Rear upper cover removal" on page
"Top cover removal" on page
Rear
4-24.
4-19.
A
Connector
Left