Buffer Diverter Gate Removal - Lexmark X850e Service Manual

Buffer diverter gate removal

1.
Open the finisher front door assembly.
2.
Move the lower pinch guide assembly (A) to the right.
3.
Remove the rear upper cover. See
4.
Remove the buffer diverter gate solenoid. See
5.
Remove the link (B).
Buffer diverter gate
6.
Move the buffer diverter gate (C) toward the rear, the left, and then forward, as shown.
7.
Remove the buffer diverter gate (C).
"Rear upper cover removal" on page
"Buffer diverter gate solenoid removal" on page
B
C
4-101.
A
Rear
A
Repair information
7500-XXX
4-180.
4-169