The Contents Of Bit Memory Table Are Represented As 1 Bit Data; Bit Memory Table - Omron NT31C Reference Manual

Commands/Responses
Reference: The maximum number which can be specified for character string memory table
Response
Format
Function
4-3-10 Bit Memory Table Write Command
Command
Format
374
depends on the setting for numbers of character string table entries
(256/1000/2000) made at the Support Tool. However, it is not possible to write to
character string memory table of numbers higher than No.500 since they are
used only as a reading area.
Only if Yes is set for the Response memory switch, the response indicated below
is returned on normal completion.
[ESC] W
1B 57
s , s : Check sum (2 hexadecimal digits)
1 2
This is always added (fixed as 25H).
Writes specified data to the specified character string memory tables.
[ESC] W B
1B 57 42
Data of 16 tables
d11 d14
* * * *
m : Check sum present/absent (1 BCD digit)
0 : Absent
1 : Present
8 : Absent (effective only when 1 table written)
9 : Present (effective only when 1 table written)
t to t : First bit memory table number written to (4 BCD digits)
1 4
0000 to 0999
l , l : Number of written tables (2 BCD digits)
1 2
00
01 to 99
When m is 8 or 9, omit this setting.
d1 to d1 , ..., dn to dn
1 4 1
Contents of the written bit memory tables (4 hexadecimal dig-
its, × n)
0000 to FFFF

The contents of bit memory table are represented as 1 bit data

(OFF=0, ON=1) and 16 entries of bit memory table are speci-
fied as 4 hexadecimal digits value. (Table entries with smaller
number is the rightmost bit.)
If written data is less than 16, the specification is started from bit
0. (Remaining leftmost bit will be ignored.)
The bit memory table data (4 hexadecimal digits) is delimited by
commas by each 16 tables.
s , s : Check sum (2 hexadecimal digits)
1 2
When m is 0 or 8, omit this setting.
S 0 0
53 30 30 32
(Sent from Host to PT)
m t1 t3
t2
* * * * * * * * * *
Data of 16 tables
,
dn1
2C
* *
:100 tables
:1 to 99 tables
:
4
H
Section
s1 s2 [CR]
35 0D
t4 (l1) (l2)
* * * * * *
(s1) (s2) [CR]
dn4
0D
* * * * * *
4-3