Character Displays; Types Of Characters; Designating Display Positions; Character Scale - Omron NT612G Series Operation Manual

Character Displays

4-1 Character Displays
4-1-1

Types of Characters

Character fonts
Numeric display p y

Character scale

Display attributes
Note When zero suppress is in effect, zeros on the left of the number are not dis-
4-1-2

Designating Display Positions

4-1-3 Character Scale
40
The type, size, and attributes of characters that can be displayed on the
NT600M screen are shown on the next page. Character type, size, and at-
tributes are set at the time of creation on the Support Tool. When an
RS-232C or RS-422A Host Interface Unit is used, coordinates, characters,
etc, can be designated with commands from the host in Terminal Mode.
Half-size characters (8 x 8 dots)
Normal characters (8 X 16 dots)
Marks (16 X 16 dots)
Number of digits displayed
Number of decimal digits
Zero suppress (see note)
+/-- sign
No sizing (equal), double-width, double-height, 4x, 9x, 16x, or 64x character sizes
Standard display, inverse, blinking, and, inverse blinking
played. For example, "00028050" would be displayed as "28050".
The display positions can be designated in increments of display dots. When
characters overlap, characters written last overwrite those written earlier.
(Terminal Mode)
You can designate no sizing (equal), double-width, double-height, 4x, 9x,
16x, or 64x character sizes. When enlarging by 4x or more, you can make
the characters easier to read with the smoothing process (a process that re-
moves the notches from characters when they are enlarged).
Alphanumeric characters, symbols.
Alphanumeric characters, symbols.
Pictographs defined by the user (up to 64 possible)
Character codes: FF20 to FF5F
1 to 8
0 to 7
Select "yes" or "no."
Select "yes" or "no."
Section 4-1