Moving Component - Omron NB-series Operation Manual

3-6-8

Moving Component

Moving Component can be used to put one Vector Graphics or bitmap into the position
specified by PLC in the PT. The state and absolute position are provided by the 3 consecutive
memories in PLC. The read address controls the status of the component, the address of the Read
Address + 1 controls the coordinate position X, and the address of the Read Address + 2 controls the
coordinate position Y.
Process of adding one Moving Component
1
Press the Moving Component icon, drag it to the screen, then the [Basic Properties] dialog box
of the Moving Component will pop up.
Read Address: Controls the first address of the word address controlling the displayed
Address: Refers to the first address of the word address corresponding to the Moving
Word Length: Displays the data length of the read address, which is fixed to "3".
NB-series Programmable Terminals NB-Designer Operation Manual(V106)
information (such as the state, graphics, label and so on) of the Moving
Component in PLC.
Component.
3 Functions of NB-Designer
3
3-107