Touch Switch Check - Omron NS7 Series Setup Manual

6-9 Hardware Check
6-9-2

Touch Switch Check

This function checks whether the touch switches are operating normally.
Check the touch panel by using operations from the Hardware Check Tab Page in the System
Menu, as follows:
1. Press the Touch Switch Check Button to switch to the Touch Switch Check Screen.
2. Press the screen. If the part of the screen touched is shown in inverse display, the touch switch
is operating normally.
3. Press the button in the top right corner to return to the Hardware Check Screen.
Reference
6-42
Two points cannot be touched at the same time on the Touch Panel Check Screen.
The position touched
is shown in inverse
display.