Setting The Conditions Of Communications With The Pc By Using The Memory Switches - Omron NT620S Operation Manual

Setting the Conditions of Communications with the PC by Using the Memory Switches

3-5 Setting the Conditions of Communications with the PC by
Using the Memory Switches
Memory Switches
Reference
Setting Functions and the Memory Switch Menu
The NT620S/620C can be connected to a PC by the host link, NT link (1:1), NT
link (1:N) or memory link. The link can be selected by setting the memory switch.
Also, the host link baud rate, resume function effective/ineffective, etc. are set
with the memory switches.
This section describes the communications condition settings by using the
memory switches.
The NT620S/620C has the memory areas used to store the PC connection meth-
od, communications conditions, system settings, etc. which can be used as the
switches and called the "memory switches". Since the memory switches use the
flash memory, the stored data can be held even when the power supply is turned
OFF.
If the memory switch data is not backed up by the built-in battery, it will all be
initialized to the values set with the support tool when the NT620S/620C is
switched OFF.
If the message "Battery Lowered" is displayed while the NT620S/620C is oper-
ating, replace the built-in battery immediately. For details on how to replace the
battery, see "Replacing the Battery" (page 275).
The memory switches can be set easily by using the memory switch menu in the
System Menu.
The memory switches can also be set by selecting "In.Scr" [F8] on the "File
Selection" screen of the support tool. The settings made using the support tool
are written to the NT620S/NT620C on screen data registration. For details, refer
to the NT-series support tool operation manual (V028-E1).
The settings that can be recorded for the memory switches are shown below. For
details on each function, see the next section and 3-8 "Various System Settings"
(page 81).
[Host Link/NT Link]
MEMORY SWITCH MENU
Quit Comm. Method Host Link
Key Press Sound ON Host Link Speed 9600bps
ON
Buzzer Sound
Screen Saver None
Resume Function ON
Printer ESC/P TONE
Section 3-5
69