SP5xxx Mode
5024*
mm/inch Display Selection
Selects the unit of measurement.
After selection, turn the main power switch off and on.
[0~1/1]
0: mm
1: inch
5037
Status Lamp Detection
Enables or disables the function of the status lamp installed above the operation
panel.
[0~1/1]
0: Off: Disabled
1: On: Enabled
This status lamp requires special ordering and installation for this machine.
5045
Accounting Counter
Selects the counting method if the meter charge mode is enabled with SP5-930-
001.
Note: You can change the setting only one time.
[0 to 1/ 1]
0: Development counter. Shows the total counts for color (Y,M,C) and black (K).
1: Paper counter. Shows the total page counts for: Color Total, Black Total, Color
Copies, Black Copies, Color Prints, Black Prints.
5047
Reverse Display
001
Reverse Paper
Display
002
Punched Paper
SM
CÓPIA NÃO CONTROLADA
SERVICE PROGRAM MODE TABLES
Determines whether the tray loaded with paper printed on
one side is displayed on the operation panel.
[0~1/0/1]
0:
Not displayed
1:
Displayed
Determines whether the tray loaded with punched paper is
displayed on the operation panel.
[0~1/1/1]
0: Disable
1: Enable
5-69
CÓPIA NÃO CONTROLADA
B064 Series/B140 Series
/B246 Series/D052 Series