Removing And Reinstalling The Charging Wire Cleaning Unit; Removing And Reinstalling The Pcl - Konica Minolta 7155 Service Manual

[5] Removing and Reinstalling the
Charging Wire Cleaning Unit
Caution:
Be sure the power cord has been
unplugged from the wall outlet.
a. Procedure
(1) Remove the charging wire.
(2) Remove the stop ring and remove the charging
wire cleaning pad.
Caution1: When removing the charging wire
cleaning pad, be careful not to drop
the two collars.
Collar
Charging wire cleaning pad
Caution2: When installing the charging wire
cleaning pad, install the pad in the
orientation shown below. Also, do
not forget to attach the two collars.
Charging wire cleaning pad
(3) Reinstall the above parts following the removal
steps in reverse.

[6] Removing and Reinstalling the PCL

a.
(1) Remove the charging corona unit.
(2) Disconnect the wire binding band at two loca-
(3) Release the lock and remove the PCL.
Stop ring
Collar
3-F-3
Caution:
Be sure the power cord has been
unplugged from the wall outlet.
Procedure
tions.
PCL
Lock
PCL
PCL
Wire binding band
CORONA UNIT
2
1