Adjustment Procedures; Field Service Program Modes - Konica Minolta BIZHUB 25E Field Engineering Manual

3 Adjustment Procedures

3.1 Field service program modes

The fax machine feature maintenance modes for machine adjustment. Each mode is listed below along with
the command used to activate the mode and a brief functional description.
Press <Mode> about two seconds until you hear the beep twice.
When you press " * ", you will hear short beeps. However continue the operation, as there is no problem.
Service Program
Machine parameters
Memory switch
User data clear
All RAM clear
Unique switches
T30 Monitor
Printer maintenance
mode
Service report printing You can print out a report that contains ma-
Monitor speaker
Test Modes
Print parameter set-
tings
Factory functions
Line tests
Mirror carriage transfer
mode
Consumable order
sheet
DRAM clear
Life monitor mainte-
nance
Sensor input test
Printer diagnostic mode This mode enables to confirm the operation of
Network service mode Used to clear administrator's password and ini-
Flash ROM sum check This mode enables to check Sum after the Flash
Set service report
Printer registration ad-
justment
Reset printer trouble
Cleaning mode
Explanation
Used to set or clear machine parameters.
Used to set or clear memory switches
This mode clears user programmed information. <Mode>, <*>, <0>, <2>
This mode clears all backup data to initialize the
machine.
These switches are used to program internal
machine parameters.
The communications on the journal list are able
to print.
Shows the error code for "Checkout error" errors. <Mode>, <*>, <0>, <6>
chine's usage and error history.
If you need to monitor the signal of fax communi-
cation, turn this mode on.
This mode offers the ability to print a test pattern
and monitor certain unit output functions.
This function instructs the unit to print a list of the
machine parameter, memory switch and unique
switch settings.
This function provides several machine machina
test.
This mode offers several internal tests and ability
to monitor certain unit output functions.
1. Relay test
2. Tonal signal test
3. DTMF output test
This mode moves the mirror carriage to the
transport position.
Used to set or clear the consumable order sheet. <Mode>, <*>, <1>, <5>
This clears the image storage memory.
Use this mode to clear the resettable counter or
reenter the life monitor.
This mode enables to confirm the sensor status. <Mode>, <*>, <2>, <2>
the printer parts.
tialize authentication method.
ROM version is updated.
Used to enter location where to send the service
report.
This mode adjusts the print position.
This mode clears the service call. Clear the warn-
ing when the trouble is settled.
This mode rotate the Pickup roller and registra-
tion roller automatically so that you can clean the
surface of them.
<Mode>, <*>, <0>, <0>
<Mode>, <*>, <0>, <1>
<Mode>, <*>, <0>, <3>
<Mode>, <*>, <0>, <4>
<Mode>, <*>, <0>, <5>
<Mode>, <*>, <0>, <7>
<Mode>, <*>, <0>, <8>
<Mode>, <*>, <0>, <9>
<Mode>, <*>, <1>, <0>
<Mode>, <*>, <1>, <1>
<Mode>, <*>, <1>, <2>
<Mode>, <*>, <1>, <4>
<Mode>, <*>, <1>, <6>
<Mode>, <*>, <2>, <0>
<Mode>, <*>, <2>, <3>
<Mode>, <*>, <2>, <4>
<Mode>, <*>, <2>, <9>
<Mode>, <*>, <4>, <2>
<Mode>, <*>, <4>, <3>
<Mode>, <*>, <4>, <5>
<Mode>, <*>, <4>, <6>
3-1
Operation Page
3-3
3-17
3-70
3-70
3-47
3-71
3-74
3-75
3-81
3-81
3-86
3-86
3-91
3-92
3-93
3-95
3-96
3-97
3-99
3-100
3-100
3-101
5-88
3-102
3-102