Phy Autoscan Registers; Phy Control ($ Port Index + 0X60); Datasheet - Intel IXF1104 Datasheet

®
Intel IXF1104 4-Port Gigabit Ethernet Media Access Controller
Table 94. MAC TX Statistics ($ Port_Index +0x40 – +0x58) (Sheet 4 of 4)
Name
TxTagged
TxCRCError
TxPauseFrames
TxFlowControlCollisions
Send
1. RO = Read Only, No clear on Read; R = Read, Clear on Read; W = Write only; R/W = Read/Write, No
clear; R/W/C = Read/Write, Clear on Write
8.4.4

PHY Autoscan Registers

Note: These register hold the current values of the PHY registers only when Autoscan (see
"Autoscan Operation" on page
mode. These registers are not applicable in fiber mode.
Table 95. PHY Control ($ Port Index + 0x60) (Sheet 1 of 2)
Bit Name
31:16 Reserved
15 Reset
14 Loopback
13 Speed Selection
1. RO = Read Only; RR = Clear on Read; W = Write; R/W = Read/Write
2. This register is ignored if auto-negotiation is enabled.
181
Description
Number of OK frames with VLAN tag.
(Type field = 0x8100).
Number of frames transmitted with a
legal size but with the wrong CRC field
(also called FCS field).
Number of pause MAC frames
transmitted.
Intentionally generates collisions to
curb reception of incoming traffic due to
insufficient memory available for
additional frames. The port must be in
half-duplex mode with flow control
enabled.
NOTE: To receive a correct statistic, a
last frame may have to be
transmitted after the last flow
control collisions send.
NOTE: NA - half-duplex only
103) is enabled and the IXF1104 MAC is configured in copper
Description
Reserved
PHY Soft Reset. Resets the PHY registers to their
default value.
This register bit self-clears after the reset is
complete.
0 = Normal Operation
1 = PHY reset
0 = Disable loopback mode
1 = Enable loopback mode
0.6 (Speed<1> 0.13 (Speed<0>)
00 = 10 Mbps
01 = 100 Mbps
10 = 1000 Mbps (manual mode not allowed)
11 = Reserved
1
Address Type Default
Port_Index +
R 0x00000000
0x55
Port_Index +
R 0x00000000
0x56
Port_Index +
R 0x00000000
0x57
Port_Index +
R 0x00000000
0x58
Section 5.5.8,
1
Type Default
0x00000010
001000
RO 0x0000
RO 0
RO 0
2
RO 0

Datasheet

Document Number: 278757
Revision Number: 009
Revision Date: 27-Oct-2005