0X00200000; Datasheet - Intel IXF1104 Datasheet

Page #
170
181
182
183
184
184
185
186
187
211
213
215
222
227
229
229
230

Datasheet

Document Number: 278757
Revision Number: 009
Revision Date: 27-Oct-2005
Revision Number: 008
Revision Date: August 1, 2005 (Sheet 2 of 2)
Description
Modified Table 89 "TX Config Word ($ Port_Index + 0x17)"
register from "0x0001A0" to "0x000001A0" and changed default value for bit 6 (Half Duplex)
from 1 to 0].
Modified Table 95 "PHY Control ($ Port Index + 0x60)"
descriptions of register" and register default value].
Modified Table 96 "PHY Status ($ Port Index + 0x61)"
of register" and register default value].
Modified Table 97 "PHY Identification 1 ($ Port Index + 0x62)"
descriptions of register" and register default value].
Modified Table 98 "PHY Identification 2 ($ Port Index + 0x63)"
descriptions of register" and register default value].
Modified Table 99 "Auto-Negotiation Advertisement ($ Port Index + 0x64)"
sentence descriptions of register" and register default value].
Modified Table 100 "Auto-Negotiation Link Partner Base Page Ability ($ Port Index + 0x65)"
[added "Need one-sentence descriptions of register" and register default value].
Modified Table 101 "Auto-Negotiation Expansion ($ Port Index + 0x66)"
sentence descriptions of register" and register default value].
Modified Table 102 "Auto-Negotiation Next Page Transmit ($ Port Index + 0x67)"
one-sentence descriptions of register" and register default value].
Modified Table 143 "MDIO Single Read and Write Data ($0x681)"
"MDIO write data to external device"].
Modified Table 146 "SPI3 Transmit and Global Configuration ($0x700)"
for bits 3:0 from "0" to "1" and changed default value for entire register from "0x0020000F" to

"0x00200000"].

Modified Table 147 "SPI3 Receive Configuration ($0x701)"
from "0xF" to "0x1"].
Modified Table 154 "Optical Module Control Ports 0 - 3 ($0x79A)"
bits 16:13 from "0xF" to "0x1"].
Added Figure 57 "FC-PBGA Package (Top and Bottom Views)" on page 227
"FC-PBGA Mechanical Specifications" on page
Replaced Figure 59 "Package Marking
Added Section 9.4, "RoHS Compliance" on page
Added CBGA RoHS-compliant and FC-PBGA ordering information under
Information".
[changed default value for the
[added "Need one-sentence
[added "Need one-sentence descriptions
[added "Need one-sentence
[added "Need one-sentence
[changed MDIO write data to
[changed default value for bits 11:8
[changed default value for
228.
Example".
229.
Contents
[added "Need one-
[added "Need one-
[added "Need
[changed default value
and Figure 58
Table 157 "Product
13