Table of Contents
Advertisement
2 - 8
WiNG 4.4 Switch System Reference Guide
2.5 AP-4131 Access Point to Access Port Conversion
Switch Note: AP-4131 Access Point to Access Port Conversion is only available on the
RFS6000 platform.
To convert an AP-4131 "fat" Access Point to a "thin" AP-4131 Access Port you need to load the port conversion version
firmware. Refer to the files available with you Motorola Solutions Website download package.
To convert an AP-4131 Access Point
1. Verify a TFTP server is up and running and the firmware you are going to install is in the root directory of the TFTP server.
2. Log in to the AP-4131 as Admin. The default password is Symbol.
3. Select the
AP Installation
4. From the
IP Address
address was changed, you will need to reset the AP for the change to be implemented.
5. Reset the AP if you changed the AP's IP address, buy displaying the
option. If you reset the AP-4131 you will need to login as Admin again.
main menu item.
field, enter a new IP address (if required) and select
Save-[F1]
to save the change. If the IP
System Summary
and selecting the
Reset AP
Advertisement
Table of Contents
Troubleshooting
