Unapproved Aps (Reported By Aps) - Motorola WS5100 Series Reference Manual

Last Seen (In
Seconds)
ESSID
4. The Number of Approved APs
detected.
5. Click on the Export

6.2.3 Unapproved APs (Reported by APs)

Use the Unapproved APs (Reported by APs)
access port radios and are restricted from operation within the switch managed network. The criteria for
restriction was defined using the
To view access port detected unapproved access points:
1. Select Security
2. Click on the Unapproved APs (Reported by APs)
3. The Unapproved APs (Reported by APs)
BSS MAC Address
Reporting AP
Channel
Displays the time (in seconds) the approved AP was last seen on the network.
Displays the SSID of each approved AP.
is simply the sum of all of approved access point MAC Addresses
button to export the contents of the table to a Comma Separated Values file (CSV).
Security > Access Port Intrusion Detection > Configuration
> Access Port Intrusion Detection
Displays the MAC Address of each Unapproved AP. These MAC addresses are
access points observed on the network, but have yet to be added to the list of
Approved APs, and are therefore interpreted as a threat on the network.
If a MAC Address displays on the list incorrectly, click the
the MAC Address of a newly Allowed AP index.
Displays the numerical value for the radio used with the detecting AP.
Displays the channel the Unapproved AP is currently transmitting on.
tab to review access points detected by associated switch
from the main menu tree.
tab.
table displays the following information:
Switch Security
screen.
Allow button and add
6-7