Viewing Switch Port Information - Motorola WS5100 Series Reference Manual

3-8 WS5100 Series Switch System Reference Guide
Avg. Bit Speed
% Non-unicast pkts
5. The RF Status
and radios:
Avg Signal
Avg Noise
Avg SNR
6. Refer to the
radios:
Average Number of
Retries
% Gave Up Pkts
% Non-decryptable
Pkts

3.2 Viewing Switch Port Information

The Port screen displays configuration, runtime status and statistics of the Ethernet Port 1 and Ethernet port
2. The Port screen contains three tabs supporting the following port assessment activities:
• Viewing the Port Configuration
• Viewing the Ports Runtime Status
• Reviewing Port Statistics
Displays the average bit speed for the switch over last 30 seconds and 1 hour. Use
the average bit speed value to help determine overall network speeds and
troubleshoot network congestion.
Displays the percentage of non-unicast packets seen (received & transmitted) by
the switch over last 30 seconds and 1 hour. Non-unicast traffic includes both
multicast and broadcast traffic.
section displays the following read-only RF radio signal information for associated APs
Displays the average signal strength for MUs associated with the switch over the
last 30 seconds and 1 hour. Typically, the higher the signal, the closer the MU.
Displays the average RF noise for all MUs associated with the selected WLAN.
MU noise for the last 30 seconds is displayed in black and the number in blue
represents MU noise for the last hour. If MU noise is excessive, consider moving
the MU closer to the access port, or in area with less conflicting network traffic.
Excessive noise may also be an indication of network interference.
Displays the average Signal to Noise Ratio (SNR) for all MUs associated with the
switch. The Signal to Noise Ratio is an indication of overall RF performance on the
wireless network.
Errors field for read-only packet error and loss information for associated access ports and
Displays the average number of retries for all MUs associated with the switch.
The number in black represents average retries for the last 30 seconds and the
number in blue represents average retries for the last hour.
Displays the percentage of packets which the switch gave up on for all MUs
associated with the switch. The number in black represents this statistic for the
last 30 seconds and the number in blue represents this statistic for the last hour.
Displays the percentage of undecryptable packets for all MUs associated with the
switch. The number in black represents undecryptable pkts for the last 30 seconds
and the number in blue represents undecryptable pkts for the last hour.