Configuring Access Point Radio Bandwidth - Motorola WS5100 Series Reference Manual

4-100 WS5100 Series Switch System Reference Guide
7. Enter a value between 0 and 15 for the Contention Window maximum value.
The CW Maximum is combined with the CW Minimum to define the Contention Window. From this range,
a random number is selected for the back off mechanism. Lower values are used for higher priority traffic.
8. Select the Admission Control
may be useful when multimedia traffic would be negatively impacted by an abundance of MU traffic. This
setting is not selected by default, but once enabled, has a default value of 32 stations (MUs).
9. Refer to the
messages if something goes wrong in the transaction between the applet and the switch.
10.Click OK to use the changes to the running configuration and close the dialog.
11.Click Cancel

4.7.5 Configuring Access Point Radio Bandwidth

Refer to the Bandwidth
The weight represents the switch priority assigned to the traffic transmitted from the radio for the WLAN.
For information on revising the weight assigned to each radio in respect to its intended operation within its
assigned WLAN, see
To view existing radio bandwidth weight settings:
1. Select Network
2. Click the Bandwidth
Bandwidth information displays per radio with the following data:
checkbox to enable the restriction of MUs using the WMM policy. This
Status field for the current state of the requests made from applet. This field displays error
to close the dialog without committing updates to the running configuration.
tab to view the QoS weight associated with each radio when added to a WLAN.
Editing the WLAN Configuration on page
> Access Port Radios
tab.
4-24.
from the main menu tree.