Customizing The Opening Banner; Displaying The Current Banner - Avaya 3500 series Getting Started

Configuring the switch using ACLI
Example
The following figure provides a sample of the show sys-info command.
3524GT-PWR+(config)#show sys-info
Operation Mode:
MAC Address:
P0E Module FW:
Reset Count:
Last Reset Type:
Autotopology:
Pluggable Port 21:
Pluggable Port 22:
Pluggable Port 23:
Pluggable port 24:
Pluggable Port 25:
Pluggable Port 26:
sysDescr:
Serial #:
Operational Software:
Installed software:
Operational license:
Installed license:
sysObjectID:
sysUpTime:
sysNtpTime:
sysServices:
sysContact:
sysName:
----More (q=Quit, space/return=Continue)----

Customizing the opening banner

You can customize the banner that appears when you connect to the Ethernet Routing Switch
5000 Series. You can customize the text that reads AVAYA. However you cannot customize
the second line that reads Enter [Ctrl]+y to begin.
The Banner Control feature provides an option to specify the banner text. If you choose not to
display the banner, the system enters the ACLI command mode through the default command
interface. You do not have to press the Ctrl+y keys.
The Banner display that you select is used for subsequent console sessions. For executing
the new mode in the console, you must logout. For Telnet access, all subsequent sessions use
the selected mode.

Displaying the current banner

Display the current banner.
50 Getting Started
show sys-info
Switch
C8-F4-06-D7-C8-00
4.0.1B2
16
Software Download
Enabled
None
None
None
None
None
None
Ethernet Routing Switch 3524GT-PWR+
HW:R0B
Mfg Date: 20111101
SDNI24GTP0B001
FW:t1116
FW:
Base software
Base software
1.3.6.1.4.1.45.3.80.4
8 days, 08:58:56
NTP not synchronized
6
Comments? infodev@avaya.com
FW:t1116 SW:v5.0.0.045
HW Dev:none
SW:v5.0.0.045
SW:v5.0.0.045
March 2013