Username; Supervisor Level Commands; No Username - Avaya P333T User Manual

Supervisor Level Commands

This level includes all the commands of the User and Privileged Levels (including
all show and set commands).

username

Use the username command to add a local user account. You can only do this
from within the Supervisor Level.
The syntax for this command is:
username <name> password <passwd> access-type{read-only|read-
write|admin}
name
passwd
access-type
Note: If you wish to define a name which includes spaces, you must enclose the
entire name in quotation marks, e.g. "new york".

no username

Use the no username command to remove a local user account.
The syntax for this command is:
no username <name>
Note: If you wish to define a name which includes spaces, you must enclose the
entire name in quotation marks, e.g. "new york".
Avaya P333T User's Guide
New user name
User's password
Access type definition - read only, read-write or
administrator
Chapter 6 CLI – Layer 2
135