Table of Contents
Advertisement
Multicast Commands
Show intelligent-multicast Command
Use the show intelligent-multicast command to display the intelligent
multicast configuration.
The syntax for this command is:
show intelligent-multicast
Example:
P130-N> show intelligent-multicast
Intelligent-multicast configuration:
------------------------------------
intelligent-multicast state --------------------- Disabled
Intelligent-multicast client-port-pruning time --- 600[Sec]
Intelligent-multicast router-port-pruning time ---1800[Sec]
intelligent-multicast group-filtering-delay time -
Set intelligent-multicast Command
Use the set intelligent-multicast command to enable or disable the IP-
multicast filtering application.
The syntax for this command is:
set intelligent-multicast {enable|disable}
Example:
P130-1# set intelligent-multicast enable
Done!
Set intelligent-multicast client-port-pruning time Command
Use the set intelligent-multicast client-port-pruning time
command to define aging time for client ports.
The syntax for this command is:
set intelligent-multicast client-port-pruning time <time>
<time>
Avaya P130 User's Guide
Time in seconds
Chapter 6
Avaya P130 CLI
10[Sec]
95
Advertisement
Table of Contents
