Set Ssh_Port; Set Telnet - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 2 MMB CLI (Command Line Interface) Operations
2.2.26

set ssh_port

The set ssh_port command sets a port to accept an SSH session. The default is 22.
The specifiable port numbers for <port> are 22 and the integers from 1024 to 65535.
Privileges: Administrator
(1) Syntax
set ssh_port <port>
(2) Options
None
(3) Usage example
None
(4) Messages
The following messages appear for this CLI command.
For details on the messages, see the PRIMEQUEST 1000 Series Message Reference (C122-E111EN).
The specified port number is invalid.
The specified port number is duplicated.
Unable to execute this command on a standby MMB.
2.2.27

set telnet

The set telnet command enables or disables telnet.
The default setting is disable (telnet disabled).
Privileges: Administrator
(1) Syntax
set telnet [enable | disable]
(2) Options
None
(3) Usage example
None
(4) Messages
The following messages appear for this CLI command.
For details on the messages, see the PRIMEQUEST 1000 Series Message Reference (C122-E111EN).
Unable to execute this command on a standby MMB.
249 C122-E110-10EN