Set Telnet_Port; Set Timezone - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 2 MMB CLI (Command Line Interface) Operations
2.2.28

set telnet_port

The set telnet_port command sets a port to accept a telnet session. The default port number is 23.
The specifiable port numbers for <port> are 23 and the integers from 1024 to 65535.
Privileges: Administrator
(1) Syntax
set telnet_port <port>
(2) Options
None
(3) Usage example
None
(4) Messages
The following messages appear for this CLI command.
For details on the messages, see the PRIMEQUEST 1000 Series Message Reference (C122-E111EN).
The specified port number is invalid.
The specified port number is duplicated.
Unable to execute this command on a standby MMB.
2.2.29

set timezone

The set timezone command sets the time zone.
Remarks
After setting the time zone, set the date and time again with the set date command.
Privileges: Administrator
(1) Syntax
set timezone <timezone>
(2) Options
None
(3) Usage example
None
(4) Messages
The following messages appear for this CLI command.
250 C122-E110-10EN