Figure 5.28 Operation Screen For The Pxe Boot Enable Setting - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 5 UEFI Menu Operations

FIGURE 5.28 Operation screen for the PXE boot Enable setting (2)

3. Specify Enable or Disable for PXE boot.
- Select [UEFI (PXE/iSCSI)] to enable PXE boot of a UEFI-aware OS.
- Select [Legacy PXE] to enable PXE boot of a legacy OS.
- Since iSCSI boot is not supported, do not use [Legacy iSCSI].
- Select [Disabled] to disable PXE boot.
The default is [Disabled] for all.
4. Press the [Enter] key.
The screen shown in FIGURE 5.29 Operation screen for the PXE boot Enable setting (3)
409
appears.
C122-E110-10EN