Set Up Surveillance Station - Fujitsu CELVIN NAS QE807 Operating Manual

Set up Surveillance Station

► To configure the IP cameras log on to Surveillance Station Pro via a web browser.
► Switch to Camera settings - Camera configuration.
► Enter the IP camera information, e.g. name, model and IP address.
► If you are using a USB webcam, enter the following values:

Field
Camera brand
Camera model
HTTP URL
IP address
Port
User name
Password
► To check whether the IP address or USB webcam can be successfully connected, click on Test.
► If your IP camera supports audio recordings, you can switch on the option at Recorder settings.
► Click Apply to save the changes.
► Configure the settings of Camera 2 following the above steps.
► After you have added the network cameras to the NAS, click on Monitor.
► If you are accessing this page for the first time with a web browser, you must
install additional plug-ins to display the image.

You can now use the Surveillance Station monitoring and recording functions.
Further information e.g. on motion detection recording, schedule recording and
video playback can be found in the software's online help.
Fujitsu
Values
Generic model
Generic JPEG
/video0.cgi
localhost
8168
root (random entry)
----- (random entry)
Surveillance station
69