Table 1.49 Buttons In The [Sasu#X] Window - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 1 MMB Web-UI (Web User Interface) Operations
Item
SAS/RAID Slot
Power Status
Slot Status
Card Status
Link Width
Seg/Bus/Dev
SAS/RAID Card Information Displays information on the SAS array controller card (64-byte ASCII).
Firmware Version
Voltage
+3.3VL
+12V
+5V
+3.3V

TABLE 1.49 Buttons in the [SASU#x] window

Button
On
Off
- Blink: The LED is blinking.
You can control the On, Off, and Blink states of the Location LED by clicking the
respective [On], [Off], and [Blink] buttons.
Displays the SAS/RAID slot power status.
- On
- Standby
Displays the SAS/RAID slot status.
- OK
- Not-present
- Failed
- Degraded
Displays the SAS array controller card status.
- OK
- Not-present
- Failed
- Warning
Displays the link width in the SAS/RAID slot format.
- x1
- x2
- x4
- x8
Displays the Segment#, Bus#, and Device# values of the SAS/RAID device.
If device information acquisition failed, this field displays "-".
Displays the firmware version of the SAS array controller card (64-byte ASCII).
This appears only for an FC card or RAID card.
If device information acquisition failed, this field displays "-".
Displays the current voltage or threshold.
- Warning (Low/High)
- Critical (Low/High)
If no threshold is set, this field displays "-".
Click the [On] button to turn on the Location LED.
Click the [Off] button to turn off the Location LED.
105
Description
Description
C122-E110-10EN