Fujitsu PRIMEQUEST 1000 Series Tool Reference page 311

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 2 MMB CLI (Command Line Interface) Operations
The possible status is as follows:
- completed: Normal end
- failed: Abnormal end
- updating: Firmware update in progress (percentage displayed)
- being updated: Firmware update in progress (firmware being downloaded)
- not executed: Firmware update not started
Privileges: Administrator or CE
(1) Syntax
show update_status
(2) Options
None
(3) Usage example
#show update_status
All Firmware Version : 11223344, update status:updating 35%
#
(4) Messages
The following messages appear for this CLI command.
For details on the messages, see the PRIMEQUEST 1000 Series Message Reference (C122-E111EN).
Unified Firmware Version : XX, update status:completed
Unified Firmware Version : XX, update status:not executed
Unable to execute this command on a standby MMB.
Failed to execute show update_status command.
Unified Firmware Version : XX, update status:being updated
Unified Firmware Version : XX, update status:updating YY%
Unified Firmware Version : XX, update status:failed
279 C122-E110-10EN