Set Ssh; Set Ssh_Port - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB CLI (Command Line Interface) Operations
2.2 Setting Commands

2.2.32 set ssh

Sets enable/disable of SSH.
Default setting is disable (SSH Disable).

Privilege: Administrator
(1) Input format
set ssh [enable | disable]
(2) Option
None
(3) Usage example
None
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (CA92344-0540).
Unable to execute this command on a standby MMB.

2.2.33 set ssh_port

Set the port which receives the SSH session. Default setting is 22.
The port number which indicates the <port> are 22, 1024~65535.

Privilege: Administrator
(1) Input format
set ssh_port <port>
(2) Option
None
(3) Usage example
None
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (CA92344-0540).
The specified port number is invalid.
The specified port number is duplicated.
Unable to execute this command on a standby MMB.
388
CA92344-0539-04