Show Ntpq - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 2 MMB CLI (Command Line Interface) Operations
- HTTP status
- HTTP port number
- HTTPS status
- HTTPS port number
- Telnet status
- Telnet port number
- SSH status
- SSH port number
Privileges: All
(1) Syntax
show network
(2) Options
None
(3) Usage example
# show network
Hostname:hogehoge.fujitsu.com
IP Address:10.1.2.124
Netmask:255.255.255.0
Gateway Address: 10.1.2.1
IPv6 IP Address/Prefix: 2000:2002:2003:2004:2005:2006:2007:2008/64
IPv6 Gateway Address: fe80::1234:f3ff:fe03:5555
MAC Address:00:AA:00:12:34:55
HTTP:disabled
HTTP Port Number:8081
HTTPS:disabled
HTTPS Port Number:432
Telnet:disabled
Telnet Port Number:23
SSH:enabled
SSH Port Number:22
(4) Messages
None
2.3.25

show ntpq

The show ntp command displays the ntpd operating status.
Privileges: All
(1) Syntax
show ntpq
265 C122-E110-10EN