Raid Controller] Window - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 3 PSA Web-UI (Web User Interface) Operations
1. Check the check box in [Status] in [Information about devices connected to controller]. Then, click
the [Status Clear] button. (See the remarks below.)
A settings confirmation dialog box appears.
2. Click the [OK] button in the settings confirmation dialog box.
This clears the hardware status of each device connected to the storage controller.
3. Click the [Return] button.
The browser returns to the previous window.
- Proceeding without clearing the status of the storage controller
1. Click the [Return] button.
The browser returns to the previous window.
Remarks
- Clicking the [Select All] button checks all the check boxes. Clicking the [Release All] button unchecks all
the check boxes.
- You can clear the status of up to 500 units at one time. If you click the [Status Clear] button with more than
500 units selected, a confirmation dialog box appears. The dialog box asks whether you want to clear the
status of the first 500 units.
(3) Error message
The following message appears in a dialog box at abnormal end.
Error: Status Clear Error :
For details on messages displayed in the window, see the PRIMEQUEST 1000 Series Message Reference (C122-
E111EN).
3.6.3

[RAID Controller] window

The [RAID Controller] window is the detail window displayed in association with [010400] (RAID Controller) in
[Device Class] in the [PCI Devices] window. This window displays PCI device information.
Users who have setting privileges can clear the status with the [Status Clear] button.
Note
This window does not display information on disks controlled by the RAID controller.
For details on the disk information controlled by the RAID controller, see the ServerView RAID information. For
details on ServerView RAID, see the ServerView Suite ServerView RAID Management User Manual.
ErrorCode=****
307 C122-E110-10EN