Fujitsu PRIMEQUEST 1000 Series Tool Reference page 260

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 2 MMB CLI (Command Line Interface) Operations
add partition <partition#> SB
add partition <partition#> IOB <IOB#x>[A|B] {quiet}
add partition <partition#> GSPB <GSPB#x>[A|B] {quiet}
(2) Options
quiet: This option executes the command without user interaction.
(3) Usage example
- Example: Adding SB#3 to partition#2 on the PRIMEQUEST 1800E
# add partition 2 SB 3
Are you sure to continue adding SB#3 to Partition#2? [Y/N] Y
Adding SB#3 to Partition#2 has been completed successfully.
#
- Example: Adding IOB#1A to partition#2 on the PRIMEQUEST 1800E
# add partition 2 IOB 1A
Are you sure to continue adding IOB#1A to Partition#2? [Y/N] Y
Adding IOB#1A to Partition#2 has been completed successfully.
#
(4) Messages
The following messages appear for this CLI command.
For details on the messages, see the PRIMEQUEST 1000 Series Message Reference (C122-E111EN).
Are you sure you want to add %s to Partition#%d? [Y/N]:
Adding %s to Partition#%d has been completed successfully.
The specified partition number is invalid.
The specified [SB|IOB|GSPB] number is invalid.
The specified [SB#x|IOB#x|IOB|GSPB#x|GSPB] is Not-present.
The specified [SB#x|IOB#x[A|B]|IOB-[A|B]|GSPB#x[A|B]|GSPB-[A|B]]is not free.
Unable to add the specified SB#x to the partition due to CPU mismatch between SBs.
Unable to add the specified [SB#x|IOB#x[A|B]|IOB-[A|B]|GSPB#x[A|B]|GSPB-[A|B]] to the partition
because the specified [SB#x|IOB#x[A|B]|IOB-[A|B]|GSPB#x[A|B]|GSPB-[A|B]] status is failed.
Unable to execute this command on a standby MMB.
The specified parameter is invalid.
Unable to execute this command because the system is under maintenance.
Unable to execute this command because the Partition#x is under maintenance.
Parameter missing
Failed to execute add partition command.
Failed to execute %s command.
The specified command is not supported.(error=[%s])
<SB#x> {quiet}
228 C122-E110-10EN