Creating A Disk For System Recovery; Creating The Automated System Recovery (Asr) Set - Fujitsu PRIMERGY RX600 S4 User Manual

4.2 Creating a Disk for System
Recovery
If the installation of the OS was performed manually, create a system recovery disk.
If the system file, system configuration, or environment setting change at startup, etc., is damaged,
such data can be reconstructed using the recovery information stored in the created system recovery
disk.
To create a recovery disk, prepare an unused formatted floppy disk.
Before turning on the server, connect a USB floppy disk drive. For more information, refer to "Appendix
C External Floppy Disk Drive (USB) Notes on Usage" ( pg.214).

4.2.1 Creating the Automated System Recovery (ASR) Set

After setting up Windows Server 2003, create a system recovery set. An unused formatted floppy disk
and a medium are required to store back up files.
1
Click [Start] – [All Programs] – [Accessories] – [System Tool] – [Backup].
The [Backup or Recovery Wizard] window appears.
2
Click [Next].
The [Backup or Recovery] window appears.
3
Select [Create a backup of files and settings], and then click [Next].
The [Items to Create Backups] window appears.
4
Select [All the information in this computer], and then click [Next].
The [Backup Type, Destination and Name of the Backup File] window appears.
5
Enter a name and a destination of the backup file, and then click [Next].
The [Backup or Recovery Wizard Complete] window appears.
6
Click [Finish].
Backup process starts.
7
If a message prompts you to insert a floppy disk, insert the floppy disk and click
[OK].
Automated system recovery disk is created.
PRIMERGY RX600 S4 User's Guide
79