Table 2.7 Parameter Specification Range - Fujitsu PRIMEQUEST 1000 Series Tool Reference

Hide thumbs Also See for PRIMEQUEST 1000 Series:
Table of Contents

Advertisement

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 2 MMB CLI (Command Line Interface) Operations
Command
Firmware revision status/version check
show update_status
Network survey commands
netck traceroute
netck arptbl
netck arping
netck ifconfig
netck stat
REMCS-related commands
set maintenance_ip
show maintenance_ip
Notation of parameters in the command syntax
- Multiple parameters are enclosed in brackets [ ] to indicate that one of them is to be selected.
For example, [A|B|C] means that either A, B, or C is to be selected as specified.
- A parameter is enclosed in braces { } to indicate that it can be omitted.
For example, {quiet} means that the quiet parameter can be omitted.
Parameter specification range
The parameters <partition#>, <SB#>, <IOB#>, and <GSPB#> may appear in the command syntax. You can specify
values in the following ranges for these parameters.

TABLE 2.7 Parameter specification range

<partition#>
<SB#>
<IOB#>
<GSPB#>
If the specified value falls outside the valid range, the system displays an error message and does not process the
command.
Messages
The following messages are common to all the commands.
- If the specified CLI parameter character string is an incorrect parameter, the following message appears.
Also, the CLI parameters are classified into command groups: "show," "set," "add," "remove," "clear,"
"power," "download," and "update." If the specified parameter does not belong to any of these command
groups, this message appears.
CE
Permitted
Permitted
Permitted
Permitted
Permitted
Permitted
Permitted
Permitted
PRIMEQUEST 1800E2/1800E
0 to 3
0 to 3
0 to 1 [A|B]
0 to 1 [A|B]
225
Outline
Displays the batch firmware update progress.
Displays a list of network routes.
Displays the physical Ethernet address.
Displays the physical Ethernet address.
Displays the network environment setup status.
Displays a list of port numbers being used.
Sets the REMCS network.
Displays the REMCS network setting.
C122-E110-10EN

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Primequest 1800e2Primequest 1800e

Table of Contents