Figure 5.102 Changing The Logo Display Time - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 5 UEFI Menu Operations
Changing the logo display time
Change the logo display time by using the following procedure.
1. Position the cursor to [Boot Delay Time] on the screen shown in
time (1).

FIGURE 5.102 Changing the logo display time (1)

2. Press the [Enter] key.
The area at the cursor position changes for numeric input as shown in
display time (2).
FIGURE 5.102 Changing the logo display
FIGURE 5.103 Changing the logo
497 C122-E110-10EN