Figure 5.109 Relationship Between A Device Path And Connections (Sas Disk) (4); Figure 5.110 Identifying A Disk Connected Through A Fibre Card; Figure 5.111 Relationship Of Connections Between An Ioh And Fibre Card - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 5 UEFI Menu Operations

FIGURE 5.109 Relationship between a device path and connections (SAS disk) (4)

Identifying a disk connected through a Fibre card
The following example describes how to identify an ETERNUS disk connected through a Fibre card inserted in
PCIe Slot#0 of IOB#0.

FIGURE 5.110 Identifying a disk connected through a Fibre card

The device path of this Fibre card is as follows:
Acpi(PNP0A08,0x0)/Pci(0x3,0x0)/Pci(0x0,0x0)/Pci(0x2,0x0)/Pci(0x0,0x0)/Pci(0x0,0x0)/Pci(0x0,0x0)/
Fibre(Wwn230000E000A80481,Lun0)/HD(1,GPT,
5CBBCBE2-B933-4021-903F-D201D0B5DC9C,0x400,0x40000)

FIGURE 5.111 Relationship of connections between an IOH and Fibre card

shows the detailed relationship of
connections between an IOH and disk connected through a Fibre card.
FIGURE 5.111 Relationship of connections between an IOH and Fibre card
The device path from the IOH to Fibre card is conceptually the same as the device path to a SAS device. You can
see the disk information in FIGURE 5.112 Relationship between a device path and connections (Fibre card).
503 C122-E110-10EN