Table 1.55 Buttons In The [Mmb#X] Window - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 1 MMB Web-UI (Web User Interface) Operations
Item
+1.0VL

TABLE 1.55 Buttons in the [MMB#x] window

Button
On
Off
Blink
Apply
Cancel
(1) Menu operations
[System] - [MMB] - [MMB#x]
(2) Window operations
1. Specify the information needed to change the MMB status. Then, click the [Apply] button.
This sets the information needed to change the MMB status.
Messages
The following table lists the messages displayed in this window.
Message number
I_00013 Setting completed.
I_00052 MMB switch processing has started.
I_00095 The standby MMB is rebooting now. Please wait several minutes.
E_00100 Failed to set the LED
E_00125 Failed to cancel request
I_00213 %aa cannot be executed because the system is under maintenance.
I_00467 The reboot is done. Login after a while.
W_00413 Nothing is selected.
For details on messages displayed in the window, see the PRIMEQUEST 1000 Series Message Reference (C122-
E111EN).
Description
Click the [On] button to turn on the Location LED.
Click the [Off] button to turn off the Location LED.
Click the [Blink] button to cause the Location LED to blink.
Click the [Apply] button to set the specified control information.
Click the [Cancel] button to restore the original information and not set
the specified information.
Message text
116
Description
C122-E110-10EN