Figure 1.44 [Ipv4 Console Redirection Setup] Window; Table 1.73 Setting And Display Items In The [Ipv4 Console Redirection Setup] Window - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 1 MMB Web-UI (Web User Interface) Operations

FIGURE 1.44 [IPv4 Console Redirection Setup] window

TABLE 1.73 Setting and display items in the [IPv4 Console Redirection Setup] window

Item
# Displays a partition identification number (0 to 3).
Partition Name Displays the name assigned to the partition.
IP Address Used to enter the IP address of the partition permitted to connect. Specify an IP address
of the same segment as the virtual IP address used to access the MMB Web-UI (see
[Network Interface]
IP address.
The default is 0.0.0.0.
Subnet Mask Used to enter the subnet mask for IP addresses permitted to connect.
The default is 255.255.255.255.
Video Redirection Sets whether to enable or disable video redirection.
The default is Disable.
Remote Storage Sets whether to enable or disable remote storage.
The default is Disable.
Text Console Sets whether to enable or disable text console redirection.
Redirection
window). Note that this IP address must be different from that virtual
- Enable: Enables video redirection.
- Disable: Disables video redirection.
- Enable: Enables remote storage.
- Disable: Disables remote storage.
- Enable: Enables text console redirection.
- Disable: Disables text console redirection.
142
Description
1.5.2
C122-E110-10EN