Figure 1.41 [Remove Sb/Iob/Gspb From Partition] Window; Table 1.70 Setting And Display Items In The [Remove Sb/Iob/Gspb From Partition] Window - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 1 MMB Web-UI (Web User Interface) Operations
Message number
E_00519
E_00524
For details on messages displayed in the window, see the PRIMEQUEST 1000 Series Message Reference (C122-
E111EN).
Upon the detection of multiple errors, a dialog box will display these errors.
[Remove SB/IOB/GSPB from Partition] window
Selecting the radio button of the partition in the [Partition Configuration] window and then clicking the [Remove]
button displays the [Remove SB/IOB/GSPB from Partition] window. You can select and remove an SB, IOB, or
GSPB from the partition in this window.

FIGURE 1.41 [Remove SB/IOB/GSPB from Partition] window

If maintenance mode (Hot Partition Maintenance, Warm System Maintenance, or Cold System Maintenance) is
set, only the user who set maintenance mode can operate the partitions from this window. (The user has
Administrator privileges or is maintenance personnel.)
A message will appear for partitions not under maintenance. These partitions cannot be operated.

TABLE 1.70 Setting and display items in the [Remove SB/IOB/GSPB from Partition] window

Item
SB/IOB/GSPB
Please execute it after a while again.
Unable to add the specified SB to the partition due to SB composition abnormal.
Unable to add the specified SB to the partition due to VRM composition abnormal.
Displays the SBs, IOBs, or GSPBs belonging to the partition.
You can select the radio button of the SB, IOB, or GSPB you want to remove from a
partition. Only one radio button can be selected.
Message text
Description
136 C122-E110-10EN