PRIMEQUEST 1000 Series Tool Reference
CHAPTER 5 UEFI Menu Operations
TABLE 5.32 Displayed contents of menu selection area
Item
DIMM Self Refresh
DDDC
Commit Changes and Exit
Discard Changes and Exit
(3) Help display area for menu selection
The display of the contents outlined in
selection
depends on the cursor position.
TABLE 5.33 Displayed contents of the help display area for menu selection
Cursor position
Package C3/C6 Dimm Self Refresh Enable/Disable Dimm Self Refresh during Package C3/C6.
DDDC
Commit Changes and Exit
Discard Changes and Exit
(4) Help display area for operations
This area displays explanations of the operation keys outlined in
area for
operations.
TABLE 5.34 Displayed contents of the help display area for operations
Item
↑↓ = Move Highlight
<Enter>=Select Entry
Esc=Exit without Save
Setting the memory functions
Set both the DIMM Self Refresh and DDDC functions by using the procedure shown in the following example.
Example: Disabling the Package C3/C6 Dimm Self Refresh setting.
Displayed contents
Specifies [Enabled] or [Disabled] for DIMM Self Refresh.
- Enabled
- Disabled
The default is Enabled.
Specifies [Enabled] or [Disabled] for DDDC.
- Enabled
- Disabled
The default is Enabled.
Saves the changes to settings and exits this menu.
Cancels the changes to settings and exits this menu.
TABLE 5.33 Displayed contents of the help display area for menu
Displayed contents
Enable/Disable DDDC (Double Device Data Correction).
Nothing
Nothing
TABLE 5.34 Displayed contents of the help display
Moves the cursor up or down.
Selects an entry.
Returns the display to the front page described in 5.2 Boot Manager
Front Page without saving the changes to settings in this menu.
429
Description
C122-E110-10EN