PRIMEQUEST 1000 Series Tool Reference
CHAPTER 5 UEFI Menu Operations
FIGURE 5.77 Example of the [Change Legacy Boot Order] screen display after a setting change
7. To save the changes to settings and exit this menu, select [Commit Changes and Exit] and press the [Enter]
key.
To exit this menu without saving the changes to settings, select [Discard Changes and Exit] and press the
[Enter] key.
[Change Legacy HDD Boot Priority] menu
Use the [Change Legacy HDD Boot Priority] menu to set the HDD from which a legacy OS starts.
The following figure shows the display of the [Change Legacy HDD Boot Priority] menu when it starts.
The screen displays information for each HDD. The system starts the operating system from the HDD displayed
at the top. If "//" is displayed at the beginning of the information for an HDD, the boot function of the HDD is
disabled.
468
C122-E110-10EN