Configure Pci Bus Padding] Menu; Table 5.24 Displayed Contents Of The Help Display Area For Operations - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 5 UEFI Menu Operations
(4) Help display area for operations
This area displays explanations of the operation keys outlined in
area for operations.

TABLE 5.24 Displayed contents of the help display area for operations

Item
↑↓=Move Highlight
<Enter>=Select Entry
Esc=Exit without Save
5.5.4

[Configure PCI Bus Padding] menu

On the [Configure PCI Bus Padding] menu, you can change the number of PCI buses to be allocated to the PCI
Express slot. The default number of buses for allocation to the PCI Express slot is 1. The changes made to settings
in this menu will take effect after the system reset.
Remarks
The [Configure PCI Bus Padding] menu is a function that was added with unified firmware version SA10082
(PRIMEQUEST 1800E).
The PRIMEQUEST 1800E2 supports this function as standard. You can confirm the unified firmware version by
clicking [System] - [Firmware Information] and checking [Unified Firmware Version] in the [Firmware
Information] window in the MMB Web-UI. For details on the [Firmware Information] window, see
Information] window.
The following figure shows an example of display of the screen immediately after a menu start.
TABLE 5.24 Displayed contents of the help display
Moves the cursor up or down.
Selects an entry.
Returns the display to the front page described in
Front Page without saving the changes to settings in this menu.
418
Description
5.2 Boot Manager
1.2.6 [Firmware
C122-E110-10EN