Setting Items In The [Add Filter]/[Edit Filter] Window; Setting Items In The [Alarm E-Mail] Window; Table A.26 Setting Items In The [Add Filter] And [Edit Filter] Windows; Table A.27 Setting Items In The [Alarm E-Mail] Window - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
APPENDIX A Lists of Settings
A.1.26

Setting items in the [Add Filter]/[Edit Filter] window

This section lists the defaults and specifiable values of the setting items in the [Add Filter]/[Edit Filter] window.

TABLE A.26 Setting items in the [Add Filter] and [Edit Filter] windows

Setting item
Protocol SSH
Access Control Disable
IP Address None
Subnet Mask None
A.1.27

Setting items in the [Alarm E-Mail] window

This section lists the defaults and specifiable values of the setting items in the [Alarm E-Mail] window.

TABLE A.27 Setting items in the [Alarm E-Mail] window

Setting item
Alarm E-Mail Disable
From None
To None
SMTP Server None
Subject None
Default Specifiable values
- HTTP
- HTTPS
- Telnet
- SSH
- SNMP
- Enable
- Disable
0-255, 0-255, 0-255,
0-255
0-255, 0-255, 0-255,
0-255
Default Specifiable values
- Enable
- Disable
E-mail address
E-mail address
IP address or FQDN of
SMTP server
0 to 9, a to z, A to Z, blank
space, and following
symbols: ! # " $ % & ' ( )
* + - . / _ ~
531
Remarks
Remarks
If the [Use envelope "from" address]
check box is checked, the address that
is set in [From:] is the e-mail
destination address for sending an e-
mail. The default is unchecked.
To specify multiple e-mail addresses,
delimit them with a comma (,).
C122-E110-10EN