PRIMEQUEST 1000 Series Tool Reference
CHAPTER 4 PSA CLI (Command Line Interface) Operations
4.1
Basic Operations with the CLI
This section describes the commands provided by the CLI as operating system commands.
To use the CLI, first log in to the operating system.
Some commands may not be available depending on the user privileges. See
4.1.1
CLI command list
The following table lists the CLI commands for PSA.
TABLE 4.1 Commands
No. Command name
1
Disk
management
command
2
PSA start/stop
command
3
PSA
investigation
data collection
command
4
Filter definition
update
commands
5
Local partition
number
acquisition
command
6
Serial number
acquisition
command
7
SNMP security
setting
command
8
Firmware
information
acquisition
command
Privileges
root (Linux) or
Administrator (Windows)
privileges required (*3)
root (Linux) or
Administrator (Windows)
privileges required (*3)
root (Linux) or
Administrator (Windows)
privileges required (*3)
root (Linux) or
Administrator (Windows)
privileges required (*3)
Can be executed by
general users
Can be executed by
general users
root (Linux) or
Administrator (Windows)
privileges required (*3)
root (Linux) or
Administrator (Windows)
privileges required (*3)
TABLE 4.1
Remarks
For HDD operation
For starting/stopping PSA Yes
For collecting PSA data
for investigation
For copying filter
definition to PSA work
directory or updating filter
definition
For displaying local
partition number on
standard output
For displaying serial
numbers on standard
output
For setting hosts from
which to accept SNMP
packets
For acquiring firmware
information
342
Commands.
Linux command
Windows
command
Yes
Yes (*1)
No (*2)
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
C122-E110-10EN