Table 1.81 Setting And Display Items In The [Mode] Window - Fujitsu PRIMEQUEST 1000 Series Tool Reference

PRIMEQUEST 1000 Series Tool Reference
CHAPTER 1 MMB Web-UI (Web User Interface) Operations

TABLE 1.81 Setting and display items in the [Mode] window

Item
Mirror Mode Displays whether the Mirror mode is enabled or disabled.
(current status)
Mirror Mode Sets whether to enable or disable the Mirror mode for a partition.
(setting)
The default is Disable.
TPM Displays that the TPM function is disabled.
(current status)
Remarks
The PRIMEQUEST 1800E2 does not display TPM.
POST Used to select a POST (power-on self-test) item from the pull-down menu.
The default is [Standard Diagnosis].
Setting OS Installation Set OS Installation mode.
Mode Power control processing is implemented with Windows. Powering off and on the I/O
device without following the formal procedure suppresses generation of the blue screen.
Remarks
(1) Menu operations
[Partition] - [Partition#x] - [Mode]
(2) Window operations
1. Specify each mode. Then, click the [Apply] button.
A confirmation dialog box appears.
2. Click the [OK] button.
Messages
The following table lists the messages displayed in this window.
- Enabled: The Mirror mode is enabled.
- Disabled: The Mirror mode is disabled.
- Enable
- Disable
- Fast Boot: Minimize the diagnosis time for a fast boot.
- Standard Diagnosis: Perform a standard diagnosis.
- Full Diagnosis: Perform a diagnosis by checking all items.
- The procedure in this item is executed as an operating system installation procedure.
Do not make this setting for procedures other than those for operating system
installation.
- Multiple resetting may occur depending on the operating system installed. Since
this item is automatically canceled at the occurrence of a reset in the operating
system installation procedure, you will need to execute this item every time a reset
occurs.
- This item is exclusive and needs to be executed separately from the Mirror Mode/
POST setting.
- This item is the only one set with the Partition Power On (after BIOS startup).
151
Description
C122-E110-10EN